ProPrint Model EBS -25G Bottom Glue Case Erector

  • HOME
  • ProPrint Model EBS -25G Bottom Glue Case Erector

ProPrint Model EBS -25G Bottom Glue Case Erector

Stock Number: 320093

2016 ProPrint Model EBS – 25 Bottom Glue Case Erector with a Nordson ProBlue hotmelt unit. The machine is rated up to 25 cases per minute. The erected cases are discharged either automatically or on-demand with the case oriented vertically (not horizontally) to facilitate manual or automatic packing. It has an easy-load standard magazine holding […]

Product Details

2016 ProPrint Model EBS – 25 Bottom Glue Case Erector with a Nordson ProBlue hotmelt unit. The machine is rated up to 25 cases per minute. The erected cases are discharged either automatically or on-demand with the case oriented vertically (not horizontally) to facilitate manual or automatic packing. It has an easy-load standard magazine holding up to 42” deep stack of KD on edge. Designed to allow continuous running of system while being loaded. Digital HMI panel for programming and managing most of the machine’s operations.

Case Specification:

KD Length: Min 14”  – Max 39”

KD Hight: Min 10” – Max 28”

Case length: Min 8” – Max 24”

Case Height: Min 5” – Max 15”

Power: 230 VAC, 60Hz, 1-Phase

Air: 10 CFM at 75 PSI filtered